CAB-O-SIL? LM-150D

牌號CAB-O-SIL? LM-150D
廠家Cabot Corporation
分類Silicon Based Compound
介紹CAB-O-SIL? LM-150D, the dense form of CAB-O-SIL? LM-150 is a low surface area fumed silica which provides moderate increase in viscosity and reinforcement of sealants and rubbers. The bulk density of LM-150D has been mechanically increased for faster incorporation and ease of handling.

CAB-O-SIL LM-150D is widely used to provide thixotropy and reinforcement of sealants and reinforcement in silicone rubbers. Use of a densed, higher bulk density, silica such as LM-150D requires very high shear dispersion equipment to achieve adequate dispersion of the silica. The higher bulk density of LM-150D facilitates faster wet-in or incorporation into these viscous polymer systems.
Silicone Sealants:

The primary application for CAB-O-SIL LM-150D is RTV-1 and RTV-2 silicone sealants. Among the untreated, densed fumed silicas, LM-150D provides the best balance of dispersability, thixotropy, and reinforcement. While fumed silicas with higher surface area than LM-150D will provide greater thixotropy and reinforcement, adequate dispersion may not be achieved with the low shear mixing equipment widely used in the sealant industry.
Silicone Rubbers:

CAB-O-SIL LM-150D can be used for reinforcement of HTV/HCR. LM-150D provides only moderate increase in hardness, tensile strength, and elongation but it is the easiest to disperse of the densed, untreated fumed silicas. Because of the hydrophilic surface of untreated fumed silicas, modification of the silica surface is necessary to prevent crepe hardening.
在線客服:  點擊這里給我發消息 點擊這里給我發消息 上海松翰塑膠
申請技術報告方式

可通過以下我公司客服QQ,索要技術報告

客服1:點擊這里給我發消息 客服2:點擊這里給我發消息
Cabot Corporation 產品展示 種類
CAB-O-SIL? TS-610 Silicon Based Compound
CAB-O-SIL? M-7D Silicon Based Compound
CAB-O-SIL? H-300 Silicon Based Compound
CAB-O-SIL? PTG Silicon Based Compound
CAB-O-SIL? MS-55 Silicon Based Compound
CAB-O-SIL? LM-150 Silicon Based Compound
CAB-O-SIL? CLARUS 3160 Fumed Silica Silicon Based Compound
CAB-O-SIL? TS-622 Silicon Based Compound
CAB-O-SIL? DURAMOLD? 2150 Silicon Based Compound
CAB-O-SIL? EL-1000 Silicon Based Compound

訂購說明

上海松翰塑化科技有限公司訂貨流程

【訂購導引】
       我司所銷售所有產品均為原廠原包,均可提供相關資料報告(如:物性表,MSDS報告,UL報告,COA報告,SGS報告,F(xiàn)DA等)!
       如您需要提前了解原料產品的相關性能或是需要原料產品的相關報告,請您通過電話或是客服QQ與我聯系!

【物流說明】
       自接到貴司訂購單24小時內發貨,珠三角,長三角,北京,天津均支持代收貨款。貨物送達后,請第一時間檢查外包裝,如發現物流過程中出現大量包裝損壞及原料外漏的,請讓物流人員出具證明并保存,并在24小時內與我司客服部取得聯系。


【訂購流程】
訂貨流程



【退換貨處理】
退貨:
依照中華人民共和國消費者保護法規,在您收到貨品7天內,若發現您收到的商品有瑕疵或損壞,您可以要求退貨,請主動與本公
司聯絡,敝公司接到您的商品之后,會將您的購物金額全額退回。

換貨:
若您收到的商品有瑕疵或損壞,請您于7天內與本公司聯絡,本公司有專人處理換貨事宜。
版權所有 ? Shshsj.com All Rights Reserved