ATI Steel ATI 409HP? (UNS S40920)

牌號ATI Steel ATI 409HP? (UNS S40920)
廠家Allegheny Technologies Incorporated
分類Steel
介紹ATI 409HP? (UNS S40900) ferritic stainless steel was introduced by ATI Allegheny Ludlum in 1961 to provide improved oxidation and corrosion resistance for automotive exhaust systems in comparison to carbon steel. The alloy was designated "MF-1", indicating its end use: automotive mufflers. The good fabricability of this alloy, combined with its basic corrosion resistance and economy have significantly broadened the utility of ATI 409HP? stainless.

Since its introduction, the ATI 409HP? alloy has been widely used in automotive exhaust systems for manifolds, exhaust pipes, catalytic converters, mufflers, tail pipes and other components. ATI 409HP? stainless steel sheet has also found many other applications such as in culverts, home heating systems, automotive thermostats and fuel filters, electrical transformer cases, caskets, heat exchanger tubing, and various farm equipment components. Plate has been used as blades and vanes in standby power generation turbines and as jet engine sound-deadening devices at airports.

The performance of ATI 409HP? (UNS S40900) ferritic stainless steel in most applications is excellent. However, some industry applications have resulted in intergranular corrosion of weld heat-affected zones. The result of research into this problem led to ASTM's re-definition of ATI 409HP? stainless steel. The old UNS S40900 with 0.08% carbon maximum and Ti>5xC was found to be inadequate, but there was no consensus among users how to define the new grade. Therefore, three new grades of ATI 409HP? stainless steel were created,

UNS S40910, S40920, and S40930, all with reduced (0.03% maximum) carbon but with somewhat different stabilization formulae. Under ASTM A240, orders for S40900 material may be fulfilled by supplying any one of the new 409 grades unless the purchaser states additional requirements. Composition requirements for the three varieties of ATI 409HP? alloy are shown in the composition table below.
在線客服:  點擊這里給我發消息 點擊這里給我發消息 上海松翰塑膠
申請技術報告方式

可通過以下我公司客服QQ,索要技術報告

客服1:點擊這里給我發消息 客服2:點擊這里給我發消息
Allegheny Technologies Incorporated 產品展示 種類
ATI Steel Ohmaloy? 40 Steel
ATI Steel ATI 332Mo? Steel
ATI Steel ATI 317? Steel
ATI Steel ATI 800AT? Steel
ATI Steel ATI 444? Steel
ATI Steel MINIMISER? 316L Steel
ATI Steel ATI 334Mo? Steel
ATI Steel ATI 412? Steel
ATI Steel ATI 304B7 P/M? Steel
ATI Steel ATI C-300? Steel

訂購說明

上海松翰塑化科技有限公司訂貨流程

【訂購導引】
       我司所銷售所有產品均為原廠原包,均可提供相關資料報告(如:物性表,MSDS報告,UL報告,COA報告,SGS報告,F(xiàn)DA等)!
       如您需要提前了解原料產品的相關性能或是需要原料產品的相關報告,請您通過電話或是客服QQ與我聯系!

【物流說明】
       自接到貴司訂購單24小時內發貨,珠三角,長三角,北京,天津均支持代收貨款。貨物送達后,請第一時間檢查外包裝,如發現物流過程中出現大量包裝損壞及原料外漏的,請讓物流人員出具證明并保存,并在24小時內與我司客服部取得聯系。


【訂購流程】
訂貨流程



【退換貨處理】
退貨:
依照中華人民共和國消費者保護法規,在您收到貨品7天內,若發現您收到的商品有瑕疵或損壞,您可以要求退貨,請主動與本公
司聯絡,敝公司接到您的商品之后,會將您的購物金額全額退回。

換貨:
若您收到的商品有瑕疵或損壞,請您于7天內與本公司聯絡,本公司有專人處理換貨事宜。
版權所有 ? Shshsj.com All Rights Reserved