APYRAL 30X

牌號APYRAL 30X
廠家Nabaltec AG
分類Flame Retardant
介紹APYRAL? products have a very high chemical purity of at least 99.5 %. The remaining constituents consist mainly of sodium oxide, which is part of the crystal lattice and partly adhering to the APYRAL? surface in hydrated form, as well as traces of iron and silicon compounds.
Aluminium hydroxide is non-soluble in water with amphoteric characteristics. Due to the sodium oxide components, a watery APYRAL? suspension has a pH value of 8-9. This must be taken into consideration in watery or other alkali-sensitive solvents or dispersions - particularly where other additives are used, which are restricted in use to a certain pH range. In case of doubt, tests must be made for possible interactions.
In many applications APYRAL? is not only used as flame retardant, but does also fulfil a function as white pigment. Due to its whiteness, APYRAL? behaves neutral to the colouring of polymers.
The Mohs hardness of 2.5 - 3 causes no problems even in highly filled molten masses. The relatively high heat capacity cp of 1.65 J/gK at 400°K (127°C) has a beneficial effect on the dimensional stability under heat for APYRAL? filled polymers. This even has priority in some applications.
With a specific density of 2.4 g/cm3, APYRAL? is a medium-density mineral filler. As a result of the required filling levels, the density of the flame-retarded plastics is increased compared with the unfilled polymer. In total, however, APYRAL? is one of the most attractive flame retardants, even on the basis of a volume-specific cost balance.
在線客服:  點擊這里給我發消息 點擊這里給我發消息 上海松翰塑膠
申請技術報告方式

可通過以下我公司客服QQ,索要技術報告

客服1:點擊這里給我發消息 客服2:點擊這里給我發消息
Nabaltec AG 產品展示 種類
APYRAL 20X Flame Retardant
APYRAL AOH 60 Flame Retardant
APYRAL AOH 20 Flame Retardant
ACTILOX? B30 Flame Retardant
APYRAL 33 Flame Retardant
APYRAL 200SM Flame Retardant
APYRAL 4 Flame Retardant
APYMAG 80 Flame Retardant
APYRAL 60 VS1 Flame Retardant
APYMAG 40 Flame Retardant

訂購說明

上海松翰塑化科技有限公司訂貨流程

【訂購導引】
       我司所銷售所有產品均為原廠原包,均可提供相關資料報告(如:物性表,MSDS報告,UL報告,COA報告,SGS報告,FDA等)!
       如您需要提前了解原料產品的相關性能或是需要原料產品的相關報告,請您通過電話或是客服QQ與我聯系!

【物流說明】
       自接到貴司訂購單24小時內發貨,珠三角,長三角,北京,天津均支持代收貨款。貨物送達后,請第一時間檢查外包裝,如發現物流過程中出現大量包裝損壞及原料外漏的,請讓物流人員出具證明并保存,并在24小時內與我司客服部取得聯系。


【訂購流程】
訂貨流程



【退換貨處理】
退貨:
依照中華人民共和國消費者保護法規,在您收到貨品7天內,若發現您收到的商品有瑕疵或損壞,您可以要求退貨,請主動與本公
司聯絡,敝公司接到您的商品之后,會將您的購物金額全額退回。

換貨:
若您收到的商品有瑕疵或損壞,請您于7天內與本公司聯絡,本公司有專人處理換貨事宜。
版權所有 ? Shshsj.com All Rights Reserved